Available adjustment shims for S 3
WARNING: This page is about a different car, the 2004 Volkswagen R32. However, it is still accessible from the selected car via links, so may be relevant.
| Shim thickness (mm) | ||
| 1.30 | 1.69 | 2.08 |
| 1.33 | 1.72 | 2.11 |
| 1.36 | 1.75 | 2.14 |
| 1.39 | 1.78 | 2.17 |
| 1.42 | 1.81 | 2.20 |
| 1.45 | 1.84 | 2.23 |
| 1.48 | 1.87 | 2.26 |
| 1.51 | 1.90 | 2.29 |
| 1.54 | 1.93 | 2.32 |
| 1.57 | 1.96 | 2.35 |
| 1.60 | 1.99 | 2.38 |
| 1.63 | 2.02 | 2.41 |
| 1.66 | 2.05 | 2.44 |
- Remove drive pinion housing complete with shaft bevel gear and adjustment shim 1.3 mm.
- Install determined adjustment shim S 3 .
2 shims corresponding to the measured value may be installed.