LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> GTI GLX >> Repair and Diagnosis >> External Pages >> Different car >> Section 104 (5 AND 6 SPD. MANUAL TRANSMISSION 02M (2002-05) (A4 Platform)) >> 35 Manual Transmission - Gears, Shafts >> Input Shaft, Disassembling And Assembling >> Outer Race/Tapered Roller Bearing Installation Position In Clutch Housing

Outer Race/Tapered Roller Bearing Installation Position In Clutch Housing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2005 Volkswagen Jetta, 2005 Volkswagen GTI, 2004 Volkswagen Jetta, 2004 Volkswagen GTI, and 2003 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Outer Race/Tapered Roller Bearing Installation Position In Clutch Housing
GW00001672Courtesy of VOLKSWAGEN UNITED STATES, INC.

Transmissions from build date 06 04 0

The recesses for locking plate (See Figure ) on outer race/tapered roller bearing (arrow -A-) and clutch housing (arrow -B-) must align.

scientia non olet · About LEMON Manuals