VAG1551/VAG1552 scan tool, selectable functions
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 1999 Volkswagen Jetta, 1998 Volkswagen Jetta, 1997 Volkswagen Passat, 1997 Volkswagen Jetta, and 1996 Volkswagen Passat. However, it is still accessible from the selected car via links, so may be relevant.
VAG1551/VAG1552 SCAN TOOL SELECTABLE FUNCTIONS
| Function | Requirements | |
|---|---|---|
|
|
|
| 01 Check Control Module Versions | YES | YES |
| 02 Check DTC Memory | YES | YES |
| 03 Output Diagnostic Test Mode (DTM) | YES | YES |
| 04 Basic Setting | NO | YES |
| 05 Erase DTC Memory | YES | YES |
| 06 End Output | YES | YES |
| 07 Code Control Module | YES | NO |
| 08 Read Measuring Value Block | YES | YES |