LEMON Manuals: Even more car manuals for everyone
Home >> Volkswagen >> 2000 >> Cabrio GLS, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seats - Upholstery, Covers (A3 Platform) >> Rear seat covers and padding, removing and installing (one-piece) >> Rear seat backrest cover and padding, removing and installing (one-piece)

Rear seat backrest cover and padding, removing and installing (one-piece)

NOTE: The following list refers to Fig 1 .
  1. - Cover 
    • Secured to rear wall flange with sewn -in damping section
  2. - Padding wire 
    • Hooked into padding
    • Remove and install using VAG1636
  3. - Plate 
  4. - Pull rod 
  5. - Headrest guides 
  6. - Rear wall 
  7. - Headrest bracket 
  8. - Socket-head screw 
    • 8 N.m (71 in. lb)
  9. - Bushing 
  10. - Padding 
    11. Fig 1: Identifying Rear Seat Backrest Cover And Padding Components (One-Piece)
    G03363470Courtesy of VOLKSWAGEN OF AMERICA, INC.
scientia non olet · About LEMON Manuals