Trouble Shooting
- Using wiring diagrams, perform trouble shooting procedure following instructions in trouble shooting tables. See Fig 1 and Fig 2. If specified values/test results are obtained, go to the next step shown across top of table. Disconnect test leads from electrical circuit tester after each step.
- If specified values/test results are not obtained, check item(s) listed in "Possible causes if specified value/test result was not obtained:" portion of tables. After repairing malfunction(s), check cruise control system for proper operation. If malfunction has not been corrected after performing all steps, replace cruise control module.
Courtesy of VOLKSWAGEN UNITED STATES, INC.
Courtesy of VOLKSWAGEN UNITED STATES, INC.