Turbocharger, removing and installing (engine code AAZ): Removing

WARNING: This page is about a different car, the 1996 Volkswagen Jetta. However, it is still accessible from the selected car via links, so may be relevant.

Switch ignition off.
CAUTION: Before disconnecting the battery, determine the correct coding for the anti-theft radio.
Disconnect battery Ground strap.
Remove hoses between intake manifold to turbocharger and turbocharger to air cleaner.
Disconnect oil supply line from turbocharger and mounting clip from intake manifold.
Disconnect oil return line at turbocharger.
Disconnect exhaust pipe from turbocharger and exhaust manifold support.
Remove 3 mounting bolts (arrows) between turbocharger and exhaust manifold (using either box wrench or 3205 swivel wrench).

Fig 1: Removing Mounting Bolts Between Turbocharger And Exhaust Manifold (Engine Code AAZ)