Front brake caliper piston (VW II caliper), removing and installing: Removing

CAUTION:

• Place a wooden block in the caliper to prevent damage to the piston.
• Use only enough air pressure to force the piston out.

• Force piston out of caliper using compressed air.
  WARNING: Always wear safety goggles when working with compressed air.
  Fig 1: Forcing Piston Out Of Caliper Using Compressed Air (VW II Caliper)

  Courtesy of VOLKSWAGEN OF AMERICA, INC.
• Carefully remove piston seal using modified wedge VAG 1474/5.

CAUTION: When removing, use care to ensure that the cylinder bore is not damaged.

Fig 2: Removing Piston Seal Using Modified Wedge Vag 1474/5 (VW II Caliper)

Courtesy of VOLKSWAGEN OF AMERICA, INC.