Push button, removing and installing

NOTE: The following list refers to Fig 1 .

- Circlip
- Relay lever
- Rod clip
- Guide piece
- Seal
- Connector sleeve
- Push button housing
- Removing. See PUSH BUTTON, REMOVING .
- Spring
- Guide cylinder
- Push button
- Seal
- Lock cylinder
- Removing
  - Remove circlip. Refer to PUSH BUTTON, REMOVING AND INSTALLING . Remove relay lever and pull out lock cylinder (key must be inserted in lock cylinder).
- Maintaining common key locking, refer to MAINTAINING COMMON KEY LOCKING .
- Common key locking can be maintained by repositioning locking plates
- Seal
- Contact switch
- Clip

Fig 1: Identifying Push Button Components

Courtesy of VOLKSWAGEN OF AMERICA, INC.