Removing cover and padding,

Fig 1: Unhooking Left And Right Tensioning Wire

Courtesy of VOLKSWAGEN OF AMERICA, INC.

NOTE: When clipping in, the tensioning wire -1- should be retensioned slightly.

Fig 2: Prying Out Clips And Opening Left And Right Tabs

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Fig 3: Identifying Clip Strips

Courtesy of VOLKSWAGEN OF AMERICA, INC.

Roll up seat cover until padding wire -1- is visible.
Unhook padding wire -1- using VAG1636 awl and pull seat cover off.

Fig 4: Removing Padding Wire
Courtesy of VOLKSWAGEN OF AMERICA, INC.
Take seat padding off seat frame.
NOTE: To ensure easy assembly warm seat cover to approx. 30°C (86°F) before pulling on.