Erase DTC Memory

Test conditions: 

• DTC memory was checked

• Press --> button.

Indicated on display (clear for next function selection):

Fig 1: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (1 Of 5)

• Press buttons -0- and -5- to select "Erase DTC Memory", function 05.

Indicated on display.

Fig 2: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (2 Of 5)

• Press -Q- button to confirm input.

Indicated on display.

Fig 3: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (3 Of 5)

• Press ==> button.

  Indicated on display (clear for next function selection):

  Fig 4: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (4 Of 5)

  
  NOTE:

  • If this display is shown, the correct diagnostic sequence was not followed.
  Fig 5: Identifying VAG 1551 Scan Tool Display (Erasing DTC Memory, Up To 08.94) (5 Of 5)
  
  • Follow the test sequence exactly. First check DTC memory (function 02), then erase DTC memory (function 05).