Connecting VAS 5056 to driver's airbag components

(Driver airbag and lower steering column trim removed)

• Connect airbag igniter connector to terminal -1- of VAS 5056.
• Disconnect wiring harness to airbag spiral spring with slip ring.
  Fig 1: Connecting Airbag Igniter Connector To Terminal

  
• Connect yellow 2-pin connector -3- from VAS 5056/1 to airbag wiring harness at spiral spring connector.

1. - Airbag igniter connector on VAS 5056 terminal
2. - Button of VAS 5056
3. - Connector of VAS 5056 to spiral spring with slip ring wiring harness connector