Front belt reel with tensioning unit, removing and installing (2- door): Notes
WARNING:
ALWAYS follow the prescribed work sequence for removing or installing the belt reel.
NOTE:
The following list refers to Fig 1
.
- - Belt reel
- - Hex bolt
- 40 N.m (30 ft lb)
- - Socket-head cap screw
- 23 N.m (17 ft lb)
- - Anchor rail
- - Hex bolt
- 40 N.m (30 ft lb)
- - Cap
- - Stud bolt
- - Mounting bracket
- For tensioning unit
- - Tensioning unit
- Is an integral part of seat belt
- Loosening the locking nut -10- makes the belt tensioner safe, tightening will make it operational again
- - Lock nut
- 20 N.m (15 ft lb)
- - Retaining lugs
- Determine belt reel mounting position