Connecting VAS 5056 to passenger's airbag components
NOTE:
See Evaluation for display group No. 001
.
- Remove shelf on passenger's side: refer to REMOVING AND INSTALLING PASSENGER SIDE STORAGE SHELF .
- Disconnect wiring harness to airbag unit and connect yellow 2 -pin connector -2- from VAS 5056/1 to wiring harness. See Fig 1 .
NOTE:
The following list refers to Fig 1
.
- - Button
- - Connector for airbag wiring harness
- - VAS 5056 connector
- not applicable
- - VAS 5056 connector
- not applicable