Measuring value block, reading: Notes
WARNING:
- Check the airbag system wiring by visual inspection only.
- Do not check continuity or resistance of the airbag igniter circuits.
- Switch off ignition before checking routing of wiring.
Indicated on display
Fig 1: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (1 Of 5)
- Press buttons -0- and -8- to select "Read measuring value block", function 08
Indicated on display
Fig 2: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (2 Of 5)
- Press -Q- button to confirm input.
Indicated on display
Fig 3: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (3 Of 5)
- Select desired display group number and press - Q- button to confirm input.
Indicated on display
Fig 4: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (4 Of 5)
For a key to the content of each display field see Display Group No. 001 , Evaluation for display group No. 001 , Display group No. 003 , Evaluation of display group No. 003 , Display group 005 and Evaluation for display group No. 005 .
If all displays are correct:
- Press --> button.
Indicated on display
Fig 5: Identifying VAG 1551 Scan Tool Display (Reading Measuring Value Block, From 09.94 & Up) (5 Of 5)
NOTE:
After completing checks of "Read Measuring Value Block", function 08, check DTC memory. See CHECKING DTC MEMORY
.