Side airbag unit, driver's and front passenger side, removing and installing: Notes
NOTE:
The following list refers to Fig 1
.
- - Side airbag unit, driver's and front passenger side
- - Bolt
- Ground wire secured with bolt - 2 -.
- 7 N.m (62 in. lb)
- - Connector
- - Backrest frame
- Disconnect battery Ground (GND) strap.
- Remove backrest frame, refer to FRONT SEAT BACKREST, REMOVING AND INSTALLING .
- Loosen backrest cover in area of airbag - 1 -.
- Remove bolts - 2 -.
- Disconnect connector - 3 - from airbag unit - 1 -.
- Remove airbag unit - 1 - off backrest frame - 4 -.