Camshaft identification, valve timing
WARNING: This page is about a different variant/trim than selected.
Identification
- Cam lobes base circle: a = 38 mm diameter
- Identification of stamped numbers and letters between intake and exhaust lobes:
| Engine code | ALH |
| Cylinder 1 - arrow A - | 38 A |
| Cylinder 2 - arrow B - | DE |
Valve timing at 1 mm valve lift
| Engine code | ALH |
| Intake valve opens after TDC | 16 ° |
| Intake valve closes after BDC | 25 ° |
| Exhaust valve opens before BDC | 28 ° |
| Exhaust valve closes before TDC | 19 ° |