Radio wave remote control functional variations, vehicles from 06.98 on

The various functions listed in the table can be called up and adapted by selecting the channel numbers 03 to 10.

Channel number	Significance	Measured value
03	Auto lock/unlock: Vehicles will be locked when a speed of 15 km/h is reached	on=1 off= 0
04	Auto lock/unlock: Vehicles will be unlocked when the ignition key is withdrawn from the ignition lock	on=1 off= 0
05	IM switch-off: Interior monitoring is activated or deactivated by operating central locking closed twice	on=1 off= 0
06	Horn sounds when unlocking: Confirmation signal when unlocking1)	on=1 off= 0
07	Horn sounds when locking: Confirmation signal when locking1)	on=1 off= 0
08	Turn signals flash when unlocking: Unlocking is confirmed by turn signals flashing twice	on=1 off= 0
09	Horn sounds when locking: Locking is confirmed by turn signals flashing once	on=1 off= 0
10	Setting for alarm horn: Programming the horn operation when the alarm is triggered appropriate to the legislation of the countries	1= Rest of Europe 2= Germany 3= Great Britain

1) No longer allowed according to German legislation.

The matching shown here is only an example.

Indicated on display:

Rapid data transfer HELP Select function XX

• Press buttons -1- and -0- (10 selects function "Adaptation").

Indicated on display:

Rapid data transfer Q 10 - Adaptation

• Confirm entry with the -Q- button.

Indicated on display:

Adaptation Enter channel number XX

• Press buttons -0- and -8- (channel number 08 switches the turn signals on or off when unlocking).

Indicated on display:

Adaptation Q Enter channel number 08

• Confirm entry with the -Q- button.

Indicated on display:

Channel 8 Adaptation 1 → Unlock Flashing on <-1 3->

• Press → button.

Indicated on display:

Channel 8.........Adaptation 1 Enter adaptation value XXXXX

• Press button -0- five times (e.g. 00000).

Indicated on display:

Channel 8.........Adaptation 0 Q Enter adaptation value 00000

• Confirm entry with the -Q- button.

Indicated on display:

Channel 8 Adaptation 0 Q Unlock Flashing off <-1 3->

• Confirm entry with the -Q- button.

Indicated on display:

Channel 8 Adaptation 0 Q Store amended value?

• Confirm entry with the -Q- button.

Indicated on display:

Channel 8 Adaptation 0 → Amended value is stored

• Press → button.

Indicated on display:

Rapid data transfer HELP Select function XX

• Press buttons -0- and -6- to end the output.

Indicated on display:

Rapid data transfer Q 06 End output

• Confirm entry with the -Q- button.

Indicated on display:

Rapid data transfer HELP Enter address word XX

• Switch off ignition.
• Disconnect connector to V.A.G 1551scan tool.