Evaluating display group number 013

WARNING: This page is about a different variant/trim than selected.

Display zone	Description	Display	Corrective action
1	Permanent code known	OK. not OK. no measured value2) (Key currently not being operated)	If not OK. Key code is outside the code range. "Re-synchronize" radio wave remote control via function 10 (adaptation). Refer to Adaptation . For no measured value: Battery in key is discharged. Change battery. Radio wave remote control malfunctioning, replace key.
2	Code within effective range
3	Algorithm
1	key number	mv = 1 to 41)	When operating a "synchronized" radio wave key, the position of the "synchronized" key is shown. If the tester displays "0" even when the remote key is pressed, this key must be "re-synchronized" using adaptation (10).

1) A max. of 4 remote controls can be "learned".

2) If the remote control key is operated several times the third display - no measured value - will change to "OK."