Evaluating display group number 010

WARNING: This page is about a different variant/trim than selected.

Display zone	Description	Display	Corrective action
1	S-terminal	operated not operated	Visual check of wiring Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display If the display does not change when operating, repair malfunction or replace relevant component Erase DTC memory Perform functional check Check DTC memory again
2	Mirror heating	on, off not installed
3	Trunk lid/tailgate Key switch2)	open closed not oper. implausible
4	Ignition	Terminal 15 on Terminal 15 off

2) Unclip contact switch on lock cylinder housing (with small lever)