Break down of display content for display group number 011
WARNING: This page is about a different variant/trim than selected.
| Display group 011 -Central control module- | ||||||
| Read Measuring Value Block 11 | → | ← Indicated on display | ||||
| xxx | xxx | xxx | xxx | |||
| 1 | 2 | 3 | 4 | ← Display zones | Specification | Evaluation |
| Empty1) | ||||||
| Sliding/tilting sunroof released2) | yes, no | Refer to Evaluating display group number 011 | ||||
| Trunk lid/tailgate contact switch3) | open, closed | |||||
| Hood contact switch | operated, not operated, not installed |
|||||
1) Empty means in this case: Display zone is blank
2) The central control modules sends a delayed terminal 15 signal to sliding sun-roof control module. The operation of the sliding/tilting sun-roof (STR) is possible until a front door is opened after switching off ignition.
3) Lock rotary latch must be engaged in second stage.