Evaluating display group number 008

WARNING: This page is about a different variant/trim than selected.

Display zone	Description	Display	Corrective action
1	Hood contact switch	operated not operated not installed	Visual check of wiring Check that connections of relevant current circuit are correctly connected and seated securely whilst simultaneously observing display If the display does not change when operating, repair malfunction or replace relevant component Erase DTC memory Perform functional check Check DTC memory again
2	Rear lid/tailgate Key switch 2)	open closed not oper. implausible
3	Rear lid/tailgate contact switch 1)	open closed implausible
4	Switch position, central locking thermo protection	yes, no

1) Lock rotary latch must be engaged in second stage.

2) Unclip contact switch on lock cylinder housing (with small lever)