Batteries for the main key with radio wave remote control, removing and installing: Removing
WARNING: This page is about a different variant/trim than selected.
- Insert a screwdriver in the slot between the transmitter unit -1- and the main key -2-.
- Move the screwdriver in direction of arrow and unclip the transmitter unit from the main key.
- Lever the transmitter unit apart on the two locating lugs (arrows).
- Unclip upper battery -1- from the retainers -2- with a screwdriver in direction of arrow.
- The contact plate -1- has two straight edges. When these edges are turned towards the retainers the contact plate can be removed.
- The contact plate can also be unclipped with a screwdriver.
- Now unclip the lower battery from the retainers with a screwdriver.