Batteries for the main key with radio wave remote control, removing and installing: Installing

WARNING: This page is about a different variant/trim than selected.

Note the polarity and correct position when installing the batteries.

Fig 1: Exploded View Of Key With Radio Remote Control (Non-Foldable Key)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Place the battery -4- with the positive terminal downwards into the sensor unit (positive terminal is marked on housing).
Now place the contact plate -3- on the battery -4-.
Place battery -2- with the positive terminal downwards onto the contact plate and secure.
Place sensor unit -1- and sensor unit -5- together and clip together.