Telematic Control Head -E264-, removing and installing

WARNING: This page is about a different variant/trim than selected.

Removing

CAUTION: Before beginning repairs on the electrical system, disconnect battery! Refer to 27 BATTERY, STARTER, GENERATOR, CRUISE CONTROL .

Fig 1: Identifying Area To Unclip Control Head

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Using appropriate screwdriver, carefully unclip control head from areas indicated with -arrows-.

Fig 2: Removing Telematic Control Head

Courtesy of VOLKSWAGEN UNITED STATES, INC.

CAUTION:

Telematic control head buttons cannot be removed, dismantled or serviced separately. Should malfunctions occur, replace complete control head.

Installing

Install in reverse order of removal.

Check telematic system coding and recode if necessary. Refer to Telematic Control Module -J499-, coding .