Control module for multi-function steering wheel multi-pin connector assignments
WARNING: This page is about a different variant/trim than selected.
1 - Comfort CAN Bus - Low
2 - Open
3 - Comfort CAN Bus - High
4 - Open
5 - Radio, serial data
6 - Data Link Connector (DLC) K-wire
7 - Cruise Control System (CCS) - resume, accelerate
8 - CAN Bus Ground (GND)
9 - Open
10 - Ground (GND), terminal 31
11 - Double tone horn relay
12 - Terminal15
13 - Terminal 30
14 - Open
15 - Terminal 58d
16 - Cruise Control System (CCS) + (SET/ delay)
17 - Heating inlet "ON"
18 - CAN Bus to Control module in steering wheel -E221-