Amplifier - Golf & GTI , removing and installing

WARNING: This page is about a different variant/trim than selected.

Removing

CAUTION:

Before beginning repairs on the electrical system:

Switch off all electrical consumers.
Switch ignition off and remove ignition key.

Open left luggage compartment trim flap.
Disconnect electrical connections at amplifier.

Fig 1: Identifying Amplifier Screws - Golf & GTI

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Remove screws -arrows-.
Remove amplifier from bracket.

Installing

Install in reverse order of removal.
Ensure radio is coded accordingly for "Monsoon" system using On Board Diagnostic program function 07, "Code Control Module": Radio system "Premium V". Refer to Code Control Module (radio) (function 07) . Radio system "Premium VI". Refer to Code Control Module (radio) (function 07) .

NOTE: Radio sound system coding must be checked/performed in order to account for presence of CD Changer, Monsoon amplifier (if installed) and interior sound field differences between models.