Display group 001, evaluating

WARNING: This page is about a different variant/trim than selected.

Display field	Description	Display	Corrective action
1	Volume control "quieter"	not oper. = not operating quieter > = operating button "Vol -"	- Perform visual check of wiring and connections Check wiring and connections of affected circuit for correct connection and tight fit while simultaneously observing display. If display does not change after checking connections, troubleshoot wiring using wiring diagram Replace relevant component, if necessary. Erase DTC memory. Perform functional check Check DTC memory again.
2	Volume control "louder"	not oper. = not operating quieter > = operating button "Vol +"
3	Station search "band-down"	not oper. = not operating mem. down > = operating button " [No Idea - nabla] "
4	Station search "band-up"	not oper. = not operating mem. up > = operating button " Δ "

Display group 002
Read Measuring Value Block 2			→	Indicated on display	-	-
xxx	xxx	xxx	xxx		-	-
1	2	3	4	← Display fields	Designation	Evaluating display fields
-	-	-	-	Empty	-	-
-	-	-	Cruise control system "CANCEL"		not oper. = not operating OFF = operating button "CANCEL"	Refer to Display group 002, evaluating
-	-	Cruise control system "RES+"			not oper. = not operating RES+ = operating button "RES+"	-
-	Cruise control system "SET -"				not oper. = not operating SET - = operating button "SET -"	-