Wire Stripper VAS1978/3

Fig 1: Wire Stripper (VAS1978/3)

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Wire Stripper VAS1978/3 is used for professional stripping and cutting of wires.

Wire Stripper VAS1978/3 is a component of Wiring Harness Repair Kit VAS1978 and of Wiring Harness Repair Set VAS1978A.

Wire stripper has an adjustable stop in its pliers-jaws which can be set to the desired length of wire insulation to be removed.

Stripping: 

• Set the slideable stop in pliers-jaws to the desired length dimension to be stripped.
Fig 2: Stripping Wire
Courtesy of VOLKSWAGEN UNITED STATES, INC.
• Insert wire end from front up to stop into jaws of pliers and squeeze the pliers completely.
• Open pliers again and remove the stripped wire end.

Fig 3: Cutting Wire

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• If necessary, cut wires using side-cutter function on the top of the wire stripper.