Wiper motor, installing in frame

• Ensure wiper motor is in park position by briefly connecting electrical connection to wiper motor, and operating wiper switch.
• Disconnect electrical connection, insert wiper motor into frame and tighten three mounting bolts.

Tightening torque: 8 Nm

Fig 1: Identifying Wiper Linkages

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Install crank onto wiper motor shaft, aligning the linkages so that they are in-line as illustrated.

Fig 2: Identifying Wiper Motor Linkages, Hex Nut & Mounting Bolts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Tighten crank hex nut -2-.

Tightening torque: 20 Nm

• Press linkages -1- onto crank.