Wiper arms, removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Wiper Arm Caps

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 2: Identifying Wiper Arm Nuts

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Fig 3: Identifying Spindle Screw, Puller T10130, Nut & Wiper Arm

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Place locating arms of puller T10130 -2- under wiper arm -4- as illustrated.
Turn spindle screw -1- clockwise until it engages the wiper shaft and previously loosened nut -3- (the nut serves as a centering guide for spindle - 1-).
Continue to turn spindle screw -1- clockwise until the wiper arm -4- releases from shaft.
Turn spindle screw -1- counterclockwise until puller can be released from assembly.