Notes on replacing instrument cluster
WARNING: This page is about a different variant/trim than selected.
- Do not disassemble instrument cluster.
- All control and warning lights are Light Emitting Diodes (LEDs) which cannot be serviced separately. LED malfunctions require replacement of instrument cluster.
- Instrument clusters contain no field serviceable components. Malfunctions require replacement of instrument cluster.
- When the replacement of a malfunctioning instrument cluster is necessary, follow exchange part procedures.
- Complete report form and return together with inst. cluster.
- Use the original packaging from the new cluster when returning modules.
- The odometer reading must be matched to the new/exchange instrument cluster.
Through m.y. 1999:
Refer to 01 ON BOARD DIAGNOSTIC (OBD) .
From m.y. 2000:
Refer to VAS 5051/5052 Vehicle Diagnostic Testing and Information System in mode "Guided Fault Finding"