Starter, removing and installing: Installing

Install in reverse order of removal, noting the following:

• Install and torque all starter bolts and terminal nuts to values specified in table. Refer to Starter, tightening torques  .
• When reinstalling battery, torque all bolts and terminal nuts to values specified in table. Refer to Battery, tightening torques  .

Install in reverse order of removal, noting the following:

• Install and torque all starter bolts and terminal nuts to values specified in table. Refer to Starter, tightening torques  .
• When reconnecting battery, torque terminal nuts to values specified in table. Refer to Battery, tightening torques  .