Ribbed belt, checking
WARNING: This page is about a different variant/trim than selected.
CAUTION:
Always replace ribbed belt if found to be faulty. This will avoid related failures or operating problems.
- Lift vehicle and check condition of ribbed belt -1-.
- Crank engine by hand at vibration dampener/pulley -arrow-. Check ribbed belt for:
- Sub-surface cracks (cracks, core ruptures, cross sectional breaks)
- Layer separation (top layer, cord strands)
- Base break-up
- Fraying of cord strands
- Flank wear (material wear, frayed flanks, flank brittleness -glassy flanks-, surface cracks)
- Traces of oil and grease