Generator (GEN) B+ & D+ connections, securing
WARNING: This page is about a different variant/trim than selected.
Special tools and auxiliary items needed
- VAG 1331 Torque wrench (or equivalent 5 - 50 Nm )
CAUTION:
If the B+ or D+ terminal nut is not torqued as specified, the following may result:
- Battery will not be completely charged
- Vehicle electrical system malfunctions
- Danger of sparking
- Damage to electronic components and control modules due to voltage spikes
NOTE:
Screw connection for the B+ wire at compact generator is labeled B1+!
The tightening torque for the B+ wire -arrow- securing nut is 15 Nm.