2.0L (code AEG)

WARNING: This page is about a different variant/trim than selected.

Display Group	Display Field	Designation	Test Conditions	Display	Corrective Actions
66	2	Clutch vacuum vent valve -F36- and Brake switch -F47-	Clutch and brake not depressed	1000	Check for open/short circuit in wiring and connections to -F36- and/or -F47- using wiring diagram Checking -F36- and/or -F47-. Refer to 24 MULTIPORT FUEL INJECTION (MFI) for 1.8 LITER 4-CYL. 5V TURBO FUEL INJECTION & IGNITION, ENGINE CODE(S): AWD, 24 MULTIPORT FUEL INJECTION (MFI) for 1.8 LITER 4-CYL. 5V TURBO FUEL INJECTION IGNITION, ENGINE CODE(S): AWW, AWP, 24 MULTIPORT FUEL INJECTION (MFI) for 2.0 LITER 4-CYL. 2V ENGINE MECHANICAL, FUEL INJECTION & IGNITION, ENGINE CODE(S): AEG, AVH, AZG, BBW, BEV, 24 MULTIPORT FUEL INJECTION (MFI) for 2.8 LITER VR6 2V FUEL INJECTION IGNITION, 24 MULTIPORT FUEL INJECTION (MFI) for 2.8 LITER VR6 4V FUEL INJECTION IGNITION and 24 - MULTIPORT FUEL INJECTION (MFI) for 3.2 LITER VR6 4V ENGINE MECHANICAL, FUEL INJECTION IGNITION, ENGINE CODE(S): BJS
			Brake depressed	1111
			Clutch depressed	1110
	4	Cruise control switch -E45-	-E45- in OFF position	0011	Check for open/short circuit in wiring and connections to -E45-, -E227- and Engine Control Module (ECM) using wiring diagram
			-E45- in OFF position before switch point	0010
			-E45- in ON position	0000
			-E45- in RES position	1000
		Button for cruise control SET -E227-	-E45- in ON position -E227- SET button depressed	0100