Battery, disconnecting
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Obtain anti-theft radio security code.
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Do not loosen or remove ground strap from body. Disconnect terminal from battery only.
- First disconnect negative ( - ) terminal from battery.
In order to disconnect positive ( B+ ) terminal, first remove fuse holder on top of battery:
- Press locking lugs together -arrows- and remove cover.
- Remove positive bus securing bolt -1- on (+) positive terminal clamp.
- Remove securing bolts -A- and remove cables to fuses, noting the installed positions.
- Disconnect electrical connection -2-.
- Relieve tension on fuse holder mounting in direction of -arrow A- and release clip with screwdriver in direction of -arrow B-.
- Lift fuse holder from battery.
- If necessary, remove screws -arrows- and remove cover -1-.
- Release battery positive (B+) terminal clamp fastener -arrow- and remove terminal from battery post.