Battery, disconnecting
WARNING: This page is about a different variant/trim than selected.
CAUTION:
- Obtain anti-theft radio security code.
- Switch off all electrical consumers.
- Switch ignition off and remove ignition key.
- Do not loosen or remove ground strap from body. Disconnect terminal from battery only.
First remove battery cover and fuse holder from battery:
- Unclip battery positive cable from retainer -1-
- Press locking lugs together -2- and lift/remove battery cover from battery.
- Disconnect negative ( - ) terminal from battery.
- Remove bolt -1- on positive ( B+ ) terminal clamp.
- Unclip and lift/remove fuse holder mounting -2-.
- Slide fuse box out from mounting in direction of -arrow-.
- Lift fuse box away from battery and secure to front hood support with elastic cord as illustrated.
- Release battery positive (B+) terminal clamp fastener -arrow- and remove terminal from battery post.
- if necessary, remove screws -arrows- and remove cover -1-.