Adaptation (function 10): Notes

WARNING: This page is about a different variant/trim than selected.

Use this function to initiate and store the following changes:

Adaptation of odometer reading when replacing/exchanging instrument cluster.
Adaptation of fuel gauge reading.
Adaptation of Multi-function Indicator (MFA) fuel consumption indicator (where applicable).

Individual functions are called up using the appropriate channel number from adaptation table. Refer to ADAPTATION TABLE: .

ADAPTATION TABLE:

Adaptation channel	Adaptation functions
03	Multi-function Indicator (MFI) fuel consumption indicator (where applicable), adaptation. Refer to Multi-function Indicator (MFI) fuel consumption indicator, adaptation
09	Odometer, adaptation. Refer to Odometer, adaptation
16	Distance impulse number (K number), reading/confirming. Refer to Distance impulse number (K number), reading/confirming
30	Fuel gauge, checking/adaptation. Refer to Fuel gauge, checking

NOTE: After changing an adaptation value or ending an adaptation channel the function "10 - Adaptation" must be performed to select another adaptation channel!