Evaluating display group 126
WARNING: This page is about a different variant/trim than selected.
| Display field |
Description |
Display |
Corrective action |
| 2 |
Airbag control module |
Airbag 1 = OK,
Data reception via CAN Bus is OK
Airbag 0 = not OK,
Data reception via CAN Bus not OK |
- Visually check CAN Bus wire routing
- Check harness connectors of the appropriate electrical circuit for proper and secure seating and simultaneously observe display
- If the display content does not change during operation, repair malfunction
- Erase DTC memory
- Perform functional check
- Check DTC memory again
|