Evaluating display group number 006
WARNING: This page is about a different variant/trim than selected.
| Display zone |
Description |
Display |
Corrective action |
| 1 |
Check bus |
Bus OK. Bus not OK. |
- Visual check of wiring
- Check that connections of relevant current circuit are correctly connected and seated securely while simultaneously observing display
- If the display does not change when operating, repair malfunction or replace relevant component
- If no changes occur, separate all door main connectors and reconnect one after the other again
- Observe measured value block
- If display changes, replace relevant control module
- Erase DTC memory
- Perform functional check
|