Control Module Version, checking
WARNING: This page is about a different variant/trim than selected.
- Connecting scan tool. Refer to Scan tool, connecting . Initiating On Board Diagnostic (OBD). Refer to Introducing On Board Diagnostic (OBD) for airbag .
- Switch on printer with Print button (warning lamp in button lights up).
- Press buttons -0- and -1-.
Indicated on display:
| Rapid data transfer Q 01-Check Control Module Version |
- Confirm entry with the -Q- button.
Control module VW3 (example)
Indicated on display (see parts catalog for latest control module version).
| 1J0 909 609 A AIRBAG VW 3 SG V03 → Coding 00068 WSC12345 |
Top line
- 1J0 909 609 A = Control module Part No.
- Airbag VW3 = System designation
- S = Side airbag, G = Elect. belt tensioner
- V03 = software version number
Lower line
- Coding XXXXX = Coding variants
- WSC XXXXX = Dealership number (Will be automatically stored in the control module when entering the system)
- Press → button.
Indicated on display:
| Rapid data transfer HELP Enter address word XX |
Control module VW5 (example)
Indicated on display (see parts catalog for latest control module version).
| 6Q0909605 A 0F AIRBAG VW5 02 0004 → Coding 12358 WSC12345 |
Top line
- 6Q0909605 A = Control module Part No.
- 0F = Index
- Airbag VW5 = System designation
- 02 = version number crash sensor
- 0004 = software version number
Lower line
- Coding XXXXX = Coding variants
- WSC XXXXX = Dealership number (Will be automatically stored in the control module when entering the system)
- Press → button.
Indicated on display:
| Rapid data transfer HELP Enter address word XX |