Rear lid trim, removing and installing (Golf wagon/Jetta wagon): Removing

• Unscrew bolts - 2  - from lid.
• Unclip lower trim - 1  - from lid at bottom.
• Unclip lower trim - 1  - at the sides from upper trim - 5  - (harness connector).

• Unclip upper trim - 5  - first at sides out of clips - 7  - , then unclip at upper area.

Fig 1: Rear Lid Trim Assembly Overview (Golf Wagon/Jetta Wagon)

Courtesy of VOLKSWAGEN UNITED STATES, INC.