Wheel housing trim, removing and installing (Jetta): Removing

WARNING: This page is about a different variant/trim than selected.

Remove rear shelf → Rear shelf, removing and installing .
Fold seat cushion and backrest forward.
Remove press button - 1 -.
Unclip plugs - 2 - using disassembly pliers 3392.

Loosen trim - 3 - in area of clips - 4 - and pull off.

Fig 1: Wheel Housing Trim Removal/Install Components (Jetta)

GW00003819

Courtesy of VOLKSWAGEN UNITED STATES, INC.