Locking cable for ignition with key withdrawal lock, removing and installing: Unhooking

• Remove steering wheel → 69 - PASSENGER PROTECTION - AIRBAGS, SEAT BELTS
• Remove trim for steering column switch → 70 - INTERIOR TRIM
• Shift selector lever into position "P" if necessary.

Fig 1: Unhooking Locking Cable For Ignition With Key Withdrawal Lock

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Turn ignition key - A  - to "ignition on" position.
• Press wire clip - 1  - up or down according to installation position and pull at the same ignition lock cable - 2  - out at the same time.