Tire, removing: Notes
WARNING: This page is about a different variant/trim than selected.
Tires which have been installed or sealed with tire sealant, must be drained before removing from wheel.
CAUTION:
- Avoid eye or skin contact with tire sealant.
- It is hazardous to health and can irritate the eyes and cause allergies.
- Wear protective gloves and eye protection when removing tires.
- Place wheel down on a flat surface.
- Remove valve from tire valve housing.
- Drill or cut a suitable hole in the shoulder of the tire.
- Hold the tire over a drip tray and allow the sealant to flow out.
- Remove tire from wheel rim.
- Clean wheel rim for example with a damp cloth.