Specifications for rear axle, vehicles with front wheel drive
WARNING: This page is about a different variant/trim than selected.
| Rear axle/ Model |
Torsion beam axle Golf and Jetta |
| |
Basic suspension |
Sport suspension |
Sport suspension Golf GTI 132 kW |
Heavy duty suspension |
| Suspension |
1JA, 1JY, 1JD |
1JC |
1JC |
1JB, 1JG |
| |
These PR. Nos. are not shown on the vehicle data sticker. The application, the adjustments for the relevant suspension are taken from the PR. No. for the front axle shock absorbers. |
| Camber |
-1 ° 27' ± 10' |
| Maximum permissible difference between both sides |
max. 30' |
| Total toe (at specified camber) |
+ 20' ± 10' |
+ 25' ± 10' |
+ 29' ± 10' |
+ 10' +10
'/ -7
' |
| Max. allowable deviation from direction of travel (thrust angle) |
max. 20' |
| Rear axle/ Model |
Torsion beam axle Golf Wagon and Jetta Wagon |
| |
Basic suspension |
Sport suspension |
Heavy duty suspension |
| Suspension |
1JA, 1JY, 1JD |
1JC |
1JB |
| |
These PR. Nos. are not shown on the vehicle data sticker. The application, the adjustments for the relevant suspension are taken from the PR. No. for the front axle shock absorbers. |
| Camber |
-1 ° 27' ± 20' |
| Maximum permissible difference between both sides |
max. 30' |
| Total toe (at specified camber) |
+ 16' ± 10' |
+ 22' ± 10' |
+ 10' +10
'/ -7
' |
| Max. allowable deviation from direction of travel (thrust angle) |
max. 20' |