Bonded rubber mounting for subframe, removing and installing: Removing

WARNING: This page is about a different variant/trim than selected.

Remove wheels.
First remove the spring

Removing and installing spring → Spring, removing and installing

Removing and installing spring R32, → Spring R32, removing and installing

Remove subframe completely with final drive.

Subframe, removing and installing → Subframe, removing and installing

Fig 1: Pulling Out Bonded Rubber Mounting

GW00002928

Courtesy of VOLKSWAGEN UNITED STATES, INC.

Position special tool.

1 - Washer

Pull out bonded rubber mounting by tightening the spindle.