Spring, removing and installing: Notes

WARNING: This page is about a different variant/trim than selected.

Special tools, testers and auxiliary items required

Fig 1: Spring Compressor Kit V.A.G 1752

Courtesy of VOLKSWAGEN UNITED STATES, INC.

The Spring holder V.A.G 1752/15 developed for 4 Motion vehicles. Thus the safe removing and installing of the springs are possible

When compressing the spring high tension exists. Note the following safety rules.

CAUTION:

Make sure that the spring holders rest as near as possible against the spring coils.
Check the spring holders at the spring coils during the clamping action for correct seating.
Do not use an impact wrench.