Coil spring, removing

Fig 1: Compressing Coil Spring With Spring Compressor V.A.G 1752/1

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Compress coil spring with Spring Compressor V.A.G 1752/1 until the upper spring plate is free.
• Remove hex nut from piston rod.
• Remove individual components of the suspension strut and coil spring using Spring Compressor V.A.G 1752/1.

1 - Ratchet (commercially available)

2 - T10001/8

3 - T10001/11

4 - T10001/5

5 - Spring Compressor V.A.G 1752/1

6 - 2 Spring Holders (80-165 mm) V.A.G 1752/4

Fig 2: Coil Spring Properly Seated In The 2 Spring Holders V.A.G 1752/4

Courtesy of VOLKSWAGEN UNITED STATES, INC.

• Make sure the coil spring is properly seated in the 2 Spring Holders (80-165mm) V.A.G 1752/4 - arrow  -.