Technical data
WARNING: This page is about a different variant/trim than selected.
Control module identification
The version of the control module is displayed after the V.A.G 1551 scan tool or the tester VAS 5051 has been connected and the control module for brake electronics has been selected. Refer to V.A.G 1551 scan tool, connecting and selecting function .
| 1C0 907 379 C / J | ABS |
| 1C0 907 379 D / K | ABS/EDL/ASR |
| 1C0 907 379 E / G | ABS/EDL/ASR/ESP |
| 1C0 907 379 F / H | ABS/EDL/ASR/ESP 4MOTION |
Diagnostic Trouble Code (DTC) memory
A non-volatile memory ensures that the contents of the DTC memory are retained even without voltage.
Data output takes place on V.A.G 1551 scan tool in operating mode 1 (rapid data transfer), and on tester VAS 5051 in operating mode "vehicle OBD".